How To Fix Linksys Router Error Code 2178?
So, how to Fix Linksys Router Error Code 2178? There can be different methods to fix the issue. Here, this answer will cover some of the easiest ways to fix this problem.
What is a Linksys Error Code Basically?
Linksys error code is a hexadecimal code for the error caused by the network devices. This is a common error code that works with Windows and other compatible drivers and software. This code is especially identified by the vendor to understand the error.
Though this is a numeric error code, it has a technical description. The hexadecimal code format represents the memory location/address where the instruction was loaded at the time of error occurrence.
What is the Basic Cause of Linksys Router Error Codes?
Linksys router error is caused due to damage caused to the windows system files. Once the system files are corrupted, that can majorly affect the state of your computer. There can be different reasons that have caused system file errors such as incomplete driver or software installation, incomplete uninstall, incorrect deletion of files, and applications.
It can also be caused if your system has recovered from some kind of virus attack or malware. These error codes can also occur if the system has incorrectly shut down.
All these activities cause wrong entries in the windows system files. The corrupted system of networks shows incorrect information or missing information whenever any new driver or application is installed or configured. Some other error codes include 2318, 2117, 2123, 2178, and others.
Specific Cause of Linksys Router Error Code 2178
Linksys Router Code 2178 occurs due to IP conflict. This error usually is caused when there are devices on the network which has either the same name or IP address. In order to Fix Linksys Router Error Code 2178, you can switch OFF the device/devices which are connected over a network, then turn ON each of them one by one.
Further, if you face the same error code again, turn your devices OFF again then access your Linksys cloud account. The Network Map Tool helps you to rename the connected devices over a network. Just make sure that you don’t use the same name for two or more devices.
Methods to Fix Linksys Router Error Code 2178
Solution 1
In the very initial step, you have to restart all your connected devices one by one. Once the step is completed, perform ON and OFF function on all the devices. In order to Fix Linksys Router Error Code 2178, open up your ‘Linksys Cloud Account and click on the ‘Network Map’ option.
Rename all your devices with different names. Just be careful that you are not assigning the same names to two or more than one device.
If this last most important step of this solution does not work to Fix Linksys Router Error Code 2178, you can reset your router, disconnect all of the network devices and follow the proper Linksys setup process. During the complete process, ensure that the device is properly connected with the Linksys Smart Wi-Fi Router.
Solution 2
This is the second solution which you can try if the first method doesn’t help to Fix Linksys Router Error Code 2178.
Identify the erroneous device and isolate it out. Now, find the “Settings-General” icon and scroll down to the main section where you will find the process of iTunes Wi-Fi Sync. Turn off the wifi setting of that particular device that is causing the error with the error 2123 Linksys. You can enable or disable the setting by logging into the Linksys router on local mode.
Open the list of network devices and delete all the faulty devices on the network. If the device is found, Tap on “Add new device” tab and stop. Again, turn ON the faulty device and try to reconnect to the network.
Hope these methods are effective for users to help users to Fix Linksys Router Error Code 2178.
Popular Post