How Do I Reset My Linksys Re6300 WIFI Extender?
Specifications of Linksys RE6300
The function of extenders is to expand the short range of any wireless network so that it reaches to far-off areas of home and office. A Linksys wireless range extender is used as a piece of wireless Internet equipment with computers and wireless routers. The Linksys RE6300 router possesses Gigabit WiFi, 1 Gigabit ETH-ports, 0 USB-ports and a total combined WiFi throughput of 750 Mbps. This Linksys extender is also referred to as the Linksys AC750 BOOST Wi-Fi Range Extender.
How to Hard Reset my Linksys RE6300 WIFI Extender?
When you are working with the RE6300 router, you see the connections have dropped or they have become unresponsive. The first thing you should check after resetting the router is if the problems persist.
The other case may be that you have forgotten the router password and you are unable to access it anymore. One more case is possible that you have misconfigured the router and you want to reset it.
Let us check out different ways to reset Linksys RE6300 wifi extender.
Method 1: Using the Web Interface
- Open any installed browser on your system like Chrome, Mozilla or Safari and navigate to the router interface. You can visit the official Linksys website and login to its admin panel using its default username and password. You will see the configuration settings are set to default.
- Under the Administration tab of the web interface, you will find the sub-tab called Factory Defaults.
- On the Factory defaults settings page, click the button named as Restore Factory Defaults
Method 2: Using the Reset Button
1. Switch on the Linksys wifi extender. Press and hold the reset button for a longer duration of at least 10 seconds until the power light starts blinking, then release the reset button.
2. When the power light turns solid color, stop the power provided to the router for 10 seconds or more.
3. Restart the device and plug the power back to the router. This will initiate the router.
4. Lastly, as the power light turns to solid color again, this means that the router is ready to use.
Method 3: Using 30-30-30 Reset
If in case the above two methods don’t work, you can always try the 30-30-30 reset instructed as follows:
1. Firstly, Press the reset button and hold it for 30 seconds when the router is powered on. You can use a paper clip or a sharp object to hold the button.
2. Unplug the power supply to the router when you are pressing and holding the reset button. Hold the reset button for at least 30 seconds.
3. While you still hold the reset button down, plug in the power to the extender unit again and then hold it for the next 30 seconds.
4. The process is applicable for cases when you want to reset the router settings to factory default. For some similar problems, resetting the router may not work exactly.
Note: You should know about how to reset my Linksys re6300 wifi extender using the 30 30 30 resets. This is because you can note the risks and considerations while you reset your router this way, instead of just rebooting it.
Default Settings After Resetting Linksys RE6300 WIFI Extender
Once you have completed the reset of your Linksys RE6300 wifi extender, the device works on its default settings. Now, you will be able to access the following configuration settings:
Default subnet mask: 255.255.255.0
Note: So, Don’t just keep using the default settings of the extender device. It is important to change the default settings to custom settings because it helps to improve its security and prevents unauthorized access to your network.
How to Update Firmware After I Reset my Linksys RE6300 WIFI Extender?
Additionally, it is good to keep the router updated with the latest firmware, securing it from various flaws and malware. You can opt for open-source firmware like dd-wrt, OpenWRT or LEDE.
One existing firmware for the Linksys RE6300 also includes Linksys stock firmware for the RE6300.
Popular Post